The hottest Li Keqiang made in China 2025 focuses

2022-09-19
  • Detail

Li Keqiang: "made in China 2025" focuses on Chinese equipment

in Premier Li's visit, "made in China 2025" is undoubtedly the key word. At China Nuclear Power Engineering Co., Ltd., he inspected Chinese equipment represented by nuclear power and proposed to promote the upgrading of "Chinese equipment" and establish a new image of "made in China". At the Ministry of industry and information technology, he listened to the "made in China 2025" and other reports, and stressed the need to adhere to the road of integration of new industrialization and information technology, comply with the new trends of Internet and other new technologies and industrial changes, and create new advantages of made in China

this is Li Keqiang's third deployment to promote "made in China 2025" since this year. During the two sessions this year, the premier proposed for the first time in the "government work report" that "made in China 2025" should be implemented. On the same day, Xiake Island asked Dao Shu, who participated in the research on the "made in China 2025" plan on the island, to make a detailed interpretation with the title of "Li Keqiang's trump card plan"; On March 25, Li Keqiang presided over the executive meeting of the State Council, which deployed to accelerate the implementation of "made in China 2025" and realize the upgrading of the manufacturing industry

during the inspection on June 15, Li Keqiang presided over a symposium at the Ministry of industry and information technology. The heads of 11 departments including the national development and Reform Commission, the Ministry of science and technology, the Ministry of finance, the Ministry of Commerce, the state owned assets supervision and Administration Commission, and the Academy of engineering also strengthened the requirements of the testing department for copper, and the heads of 15 central enterprises attended the meeting. At such a high-level internal symposium, how does the premier deploy and promote "made in China 2025"? The internal speech of the day will show you the truth

1. Why promote "made in China 2025"

our proposal of "made in China 2025" is actually to promote the transformation and upgrading of "made in China"

Li Keqiang: over the past 30 years since China's reform and opening up, "made in China" has traveled all over the world, and it can even be said to be "omnipresent". However, since the initial implementation of "three supplies and one subsidy", a large number of OEM products are still consumer goods. Many people go abroad to buy things and come back to have a look, "made in China", but as long as they go to the factory to have a look, the brand of goods and the equipment manufactured are mostly foreign

this is a historical stage we must go through and the only way to promote development through opening up. After more than 30 years of unremitting efforts, the international economic pattern we are facing today is changing. The world economic recovery caused by the financial crisis is weak. In response to this global economic downward pressure, developing countries are accelerating the process of industrialization and urbanization, and developed countries are also promoting the process of "Reindustrialization"

in this case, we size up the situation and actively carry out the global layout from two aspects: on the one hand, the traditional "made in China" consumer goods produced by OEM continue to export; On the other hand, the "going out" of Chinese equipment has sprung up, which in turn has led to the comprehensive upgrading of made in China

our proposal of "made in China 2025" is actually to promote the continuous upgrading of "made in China". We should solidly promote made in China 2025 and strive to form a new driving force for China's economic development

2. The "key" of "made in China 2025": realize the "smart" made in China

gather all the wise people to achieve great things. "Intelligent manufacturing" must be based on mass entrepreneurship and innovation

Li Keqiang: "one of the" keys "of" made in China 2025 "is" intelligent transformation ". The Ministry of industry and information technology is actively promoting "intelligent manufacturing" and using informatization to improve the level of equipment manufacturing. This is also consistent with the two "fulcrums" of promoting structural adjustment

the leading "fulcrum" is "mass entrepreneurship and innovation". Today, the momentum of traditional development has weakened, and the traditional growth mode is unsustainable. Therefore, we propose "mass entrepreneurship and innovation". In fact, this is closely related to China's "smart" manufacturing. Where does "Zhi" come from? That is to gather the wisdom of everyone in early May 2016. We can't rely on just a few researchers sitting in the room thinking hard, but on mass entrepreneurship and innovation. The mass entrepreneurship and innovation, to a large extent, use the Internet and information platform

gather wise men to achieve great things. Intelligent manufacturing must be based on mass entrepreneurship and innovation. We should launch all enterprises that can be launched and facilitate all people that can be convenient, so as to promote intelligent manufacturing

another "fulcrum" of structural adjustment is to vigorously develop the service industry. This includes not only traditional services, but also emerging services, modern services, and services that complement manufacturing

why are there still some difficulties in our equipment going out? First, emphasize "manufacturing" and light "design service"; The second level shows in front of the public that there is still much room for improvement in after-sales service. Made in China should not only work hard on informatization, but also mobilize the enthusiasm and creativity of 1.3 billion people and promote the service industry

3. The core of "made in China 2025": focusing on "Chinese equipment"

only focuses on the competition in the field of consumer goods, which is not conducive to China's industrial upgrading, but also difficult to form a large industrial pattern

Li Keqiang: "Chinese equipment" has formed a certain market share in China, and equipment such as high-speed rail and nuclear power are entering the international market. In turn, upgrading with "Chinese equipment" and establishing new advantages of "made in China" are the key measures

I met with representatives attending the round table summit of the Global CEO Committee a few days ago. They are very interested in "made in China 2025". Our translation is "madeinchina2025", but the connotation of "made in China 2025" is even deeper. Of course, we still need to do the traditional "madeinchina", but the core of "made in China 2025" should be focusing on "Chinese equipment"

focusing only on the competition in the field of consumer goods is not conducive to China's industrial upgrading, and it is difficult to form a large industrial pattern. So we should work hard on equipment manufacturing. China's equipment manufacturing is competitive and cost-effective. At the same time, competition in the international market can also force domestic industrial upgrading

we should promote the formation of a new pattern of international production capacity cooperation. During my recent visit to Latin America, Latin American countries generally hope to carry out large-scale infrastructure construction to boost the domestic economy. However, this will further drive inflation in the country, because most of all building materials need to be imported from China. So I told them that we should take China's advantageous equipment production line and combine it with local advantageous resources to produce locally. The president of Brazil agrees very much

the same is true of my visit to Kazakhstan last year. Their country wants to promote infrastructure construction and stimulate its economic development, but steel mills and cement plants are very small, and flat glass factories do not exist at all. I put forward that if we engage in capacity cooperation, the domestic production line will pass. At that time, China developed by introducing foreign production lines. Of course, we also need to cooperate with developed countries to combine our mid-range with their high-end, and jointly develop in developing countries. At present, researchers at home and abroad mainly use environmental pretreatment and environmental simulation tests to study the impact of environmental effects on the development of third-party markets, so as to achieve a win-win situation for the three parties

the breakthrough in upgrading "Chinese equipment" is to promote the "going out" of equipment. This will not only enable us to achieve "three wins" in the international market, but also force the comprehensive upgrading of domestic industries and create new advantages of "made in China"

global glass () Department

Copyright © 2011 JIN SHI